Configuring Users In The Local Database; Figure 260: Local User Configuration - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field Description
Password Enter a password for the user. The password length can be from 8 to 64 characters.
User Group Assign the user to at least one User Group. To assign a user to more than one group, press the
Ctrl key and click each group.
New users are assigned to the 1-Default user group by default.

Configuring Users in the Local Database

From the Local User Configuration page, you can configure additional settings for an existing CP user in the local
database.
Table 229 describes the fields you use to configure CP users in the local database.
Field Description
User Name Enter the name of the user.
Password Enter a password for the user. The password length can be from 8 to 64 characters.
User Group Assign the user to at least one User Group. To assign a user to more than one group, press the
Ctrl key and click each group.
New users are assigned to the 1-Default user group by default.
Session Timeout Enter the number of seconds a user is permitted to remain connected to the network. Once the
Session Timeout value is reached, the user is logged out automatically. A value of 0 means that
the user does not have a Session Timeout limit.
Idle Timeout Enter the number of seconds the user can remain idle before the switch automatically logs the user
out. A value of 0 means that the user does not have an idle timeout limit.
Document 34CSFP6XXUWS-SWUM100-D7
Table 228: Local User Configuration

Figure 260: Local User Configuration

Table 229: Local User Configuration
D-Link Unified Access System
Captive Portal Configuration Page 371