Radius Accounting Server Configuration; Figure 282: Add Radius Accounting Server; Table 250: Radius Server Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
Current
RADIUS Server Host Address
RADIUS Server Name
Port Number
Server Type
Secret Configured
Message Authenticator
Click Refresh to update the page with the most current information.
RADIUS A
CCOUNTING
From the RADIUS Accounting Server Configuration page, you can add a new RADIUS accounting server, configure
settings for a new or existing RADIUS accounting server, and view RADIUS accounting server status information. The
RADIUS client on the switch supports up to 32 named authentication and accounting servers.
If there are no RADIUS accounting servers configured on the system or if you select Add from the Accounting Server Host
Address menu, a subset of the fields described in the following table are available.
After you enter the Accounting server host address and click Submit, the additional configuration fields appear.
Document 34CSFP6XXUWS-SWUM100-D7

Table 250: RADIUS Server Configuration Fields

Description
An asterisk (*) in the column Indicates that the server is the current server for the
authentication server group. If no asterisk is present, the server is a backup server.
If more than one RADIUS server is configured with the same name, the switch selects
one of the servers to be the current server from the group of servers with the same
name.
When the switch sends a RADIUS request to the named server, the request is directed
to the server selected as the current server. Initially the primary server is selected as
the current server. If the primary server fails, one of the other servers becomes the
current server.
Shows the IP address of the RADIUS server.
Shows the RADIUS server name.
Multiple RADIUS servers can have the same name. In this case, RADIUS clients can
use RADIUS servers with the same name as backups for each other.
Identifies the authentication port the server uses to verify the RADIUS server
authentication. The port is a UDP port.
Shows whether the server is a Primary or Secondary server.
Indicates whether the shared secret for this server has been configured.
Shows whether the message authenticator attribute for the selected server is enabled
or disabled.
S C
ERVER ONFIGURATION

Figure 282: Add RADIUS Accounting Server

D-Link Unified Access System
RADIUS Settings Page 395