Network Dhcp Client Options; Figure 18: Dhcp Client Options; Table 11: Dhcp Client Option Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
IPv6 Fields: These display when IPv6 is selected as the protocol.
IPv6 Mode
IPv6 Prefix
IPv6 Gateway
Default Routers
• If you change any of the network connection parameters, click Submit to apply the changes to the system. If you want
the switch to retain the new values across a power cycle, you must perform a save.
N DHCP C
ETWORK
Use the fields on this page to enable and configure vendor class identifier information that the DHCP client on the switch
sends to the DHCP server when it requests a lease.
To access this page, click LAN > Administration > Network DHCP Client Options.
Field
DHCP Vendor Class ID Mode
DHCP Vendor Class ID String
Page 68

Network DHCP Client Options

Table 10: Network Connectivity Fields (Cont.)
Description
Enables or disables IPv6 mode on the interface.
If no IPv6 address displays, select Add and then enter an IPv6 prefix/length.
Select the EUI64 option if the last 64 bits are to be derived from the MAC address. For
example, you can enter 2001::/64 and select the EUI64 option to have the 64-bit
address calculated from the MAC address.
Enter the IPv6 gateway address (do not include a prefix).
Displays the address(es) entered in the IPv6 Gateway field.
O
LIENT PTIONS

Figure 18: DHCP Client Options

Table 11: DHCP Client Option Fields

Description
Specify whether to enable or disable the vendor class identifier mode.
Enter the text to add to DHCP requests as Option-60, which is the Vendor Class
Identifier option.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09