Table of Contents
Advertisement
D-Link Unified Access System
Field
MAC Address
IP Address
CP Configuration
Protocol
Verification
Viewing the Client CP Association Status
Use the CP - Client Status page to view clients that are authenticated to a specific CP configuration.
The drop-down menu lists each CP configured on the switch. To view information about the clients connected to the CP,
select it from the list.
The following table describes the fields on the Client CP Association Status page.
Field
MAC Address
IP Address
Interface
Protocol
Verification
SNMP T
C
RAP
ONFIGURATION
Use the SNMP Trap Configuration page to configure whether or not SNMP traps are sent from the Captive Portal and to
specify captive portal events that will generate a trap.
Page 382
Captive Portal Configuration
Table 239: Interface - Client Status
Description
Identifies the MAC address of the wireless client. If the MAC address is marked with
an asterisk (*), the authenticated client is authenticated by a peer switch. In order
words, the cluster controller was not the authenticator.
Identifies the IP address of the wireless client.
Identifies the captive portal the client used to access the network.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.
Figure 270: CP - Client Status
Table 240: CP - Client Status
Description
Identifies the MAC address of the wireless client. If the MAC address is marked with an
asterisk (*), the authenticated client is authenticated by a peer switch. In order words, the
cluster controller was not the authenticator.
Identifies the IP address of the wireless client.
Identifies the interface the client used to access the network.
Shows the current connection protocol, which is either HTTP or HTTPS.
Shows the current account type, which is Guest, Local, or RADIUS.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09
- Quick Links:
- Section 1: Getting Started
Hide quick links:
Advertisement
Table of Contents
