Outbound Telnet Client Configuration; Figure 41: Outbound Telnet; Table 31: Outbound Telnet Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
O T
UTBOUND ELNET
The outbound telnet feature is not available on all platforms.
Use the outbound telnet client settings to control the telnet sessions that originate from the switch and connect to a remote
system.
To access the Outbound Telnet Client Configuration page, click LAN > Administration > Outbound Telnet Client
Configuration in the navigation menu.
Field
Admin Mode
Maximum Sessions
Session Timeout
• If you change any data, click Submit to apply the changes to the system. If you want the switch to retain the new values
across a power cycle, you must perform a save.
Page 94

Outbound Telnet Client Configuration

C C
LIENT ONFIGURATION

Figure 41: Outbound Telnet

Table 31: Outbound Telnet Fields

Description
Specifies whether the Outbound Telnet service is Enabled or Disabled. The default
value is Enabled.
• Enable: Users can initiate outbound telnet sessions from the switch CLI.
• Disable: No outbound telnet sessions can originate from the switch.
Specifies the maximum number of Outbound Telnet Sessions allowed. The default
value is 5. The valid range is 0 to 5 sessions.
Specifies the Outbound Telnet login inactivity timeout. The default value is 5. The valid
range is 1 to 160 minutes.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09