Table 62: Download File To Switch Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
File Type
Image Name
Transfer Mode
TFTP Server Address Type
TFTP Server Address
TFTP File Path
TFTP File Name
Start File Transfer
Document 34CSFP6XXUWS-SWUM100-D7

Table 62: Download File to Switch Fields

Description
Specify what type of file you want to download to the switch:
• CLI Banner: The CLI banner is the text that displays in the command-line interface
before the login prompt. The CLI banner to download is a text file and displays when
a user connects to the switch by using telnet, SSH, or a serial connection.
• Code: The code is the system software image, which is saved in one of two flash
sectors called images (image1 and image2). The active image stores the active copy;
while the other image stores a second copy. The device boots and runs from the
active image. If the active image is corrupt, the system automatically boots from the
non-active image. This is a safety feature for faults occurring during the boot upgrade
process.
• Configuration: If you have a copy of a valid binary configuration file (fastpath.cfg) on
a TFTP server, you can download it to the switch.
• Text Configuration: A text-based configuration file enables you to edit a configured
text file (startup-config) offline as needed without having to translate the contents for
the D-Link software to understand. The most common usage of text-based
configuration is to upload a working configuration from a device, edit it offline to
personalize it for another similar device (i.e., change the device name, serial number,
IP address, etc.), and download it to that device.
• SSH-1 RSA Key File: SSH-1 Rivest-Shamir-Adleman (RSA) Key File. To download
SSH key files, SSH must be administratively disabled and there can be no active SSH
sessions.
• SSH-2 RSA Key PEM File: SSH-2 Rivest-Shamir-Adleman (RSA) Key File (PEM
Encoded). To download SSH key files, SSH must be administratively disabled and
there can be no active SSH sessions.
• SSH-2 DSA Key PEM File: SSH-2 Digital Signature Algorithm (DSA) Key File (PEM
Encoded). To download SSH key files, SSH must be administratively disabled and
there can be no active SSH sessions.
• SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM
Encoded).
• SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded).
• SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak
Encryption Parameter File (PEM Encoded).
• SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded).
Specify the code image you want to download, either image1 or image2. This field is
only visible when Code is selected as the File Type. The factory default is image1.
Specifies the protocol to be used for the transfer: TFTP, SFTP, or SCP.
Specify either IPv4,IPv6, or DNS address to indicate the format of the TFTP Server
Address field. The factory default is IPv4.
Enter the IP address of the TFTP server in accordance with the format indicated by the
TFTP Server Address Type. The factory default is the IPv4 address 0.0.0.0.
Enter the path on the TFTP server where the selected file is located. You may enter
up to 32 characters. The factory default is blank.
Enter the name of the file you want to download from the TFTP server. You may enter
up to 32 characters. The factory default is blank.
To initiate the download, check this box before clicking Submit.
D-Link Unified Access System
Using System Utilities Page 143