Figure 279: Radius Server Configuration-Add Server; Figure 280: Radius Server Configuration-Server Added; Table 249: Radius Server Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
If at least one RADIUS server is configured on the switch, and a host address is selected in the RADIUS Server Host Address
field, then additional fields are available on the RADIUS Server Configuration page.
Field
RADIUS Server Host Address
Port
Secret
Apply
Document 34CSFP6XXUWS-SWUM100-D7
Figure 279: RADIUS Server Configuration—Add Server
Figure 280: RADIUS Server Configuration—Server Added

Table 249: RADIUS Server Configuration Fields

Description
Use the drop-down menu to select the IP address of the RADIUS server to view or
configure. Select Add to configure additional RADIUS servers.
Identifies the authentication port the server uses to verify the RADIUS server
authentication. The port is a UDP port, and the valid range is 1-65535. The default port
for RADIUS authentication is 1812.
Shared secret text string used for authenticating and encrypting all RADIUS
communications between the device and the RADIUS server. This secret must match
the RADIUS encryption.
The Secret will only be applied if this box is checked. If the box is not checked,
anything entered in the Secret field will have no affect and will not be retained. This
field is only displayed if the user has READWRITE access.
D-Link Unified Access System
RADIUS Settings Page 393