Viewing Associated Client Qos Status; Figure 323: Associated Client Qos Status - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
NetBIOS Name
Associating Switch
Switch MAC Address
Switch IP Address
Location
Radio
VLAN
Transmit Data Rate
Network Time
Detected IP Address
Tunnel IP Address
Captive Portal

Viewing Associated Client QoS Status

The WLAN > Monitoring > Client > Associated Clients > Client QoS page for the associated client status shows
information about the bandwidth restrictions for each client associated to an AP managed by the switch. Use the menu above
the table to select the MAC address of the client with the information to view.
Table 299 on page 479 describes the information available on the Client QoS page for the associated client status.
Page 478 Monitoring Status and Statistics
Table 298: Detailed Associated Client Status (Cont.)
Description
Identifies the NetBIOS name of the wireless client. For Microsoft Windows hosts, the NetBIOS
name is typically the same as, or based on the host name.
Shows whether the AP that the wireless client is associated to is managed by the local switch
or a peer switch.
Shows the MAC address of the switch that manages the AP to which the wireless client is
associated.
Shows the IP address of the switch that manages the AP to which the wireless client is
associated.
The descriptive location configured for the managed AP.
Displays the managed AP radio interface the client is associated to and its configured mode.
If client is on a VAP using VLAN data forwarding mode, indicates the current assigned VLAN.
Indicates the rate at which the client station is currently transmitting data.
Indicates the amount of time that has passed since this client first authenticated with the
network.
Identifies the IPv4 address of the client, if available.
This field is blank for all non-tunneled clients. For a tunneled client, this is the assigned tunnel
IP address.
If client is authenticated via Captive Portal, this field contains a link to the associated Captive
Portal client status page. Please note that this field is visible only for Captive Portal-enabled
switch configurations.

Figure 323: Associated Client QoS Status

Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09