Port Channel Status; Figure 161: Port Channel Status; Table 144: Port Channel Status Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
P C S
ORT HANNEL TATUS
Use the Port Channel Status page to group one or more full duplex Ethernet links to be aggregated together to form a port-
channel, which is also known as a link aggregation group (LAG). The switch can treat the port-channel as if it were a single
link.
To access the Port Channel Status page, click LAN > Monitoring > Trunking > Status in the navigation tree.
Field
Port Channel
Port Channel Name
Port Channel Type
Admin Mode
Link State
STP Mode
Static Mode
Link Trap
Configured Ports
Active Ports
Page 240 Creating Port Channels (Trunking)

Figure 161: Port Channel Status

Table 144: Port Channel Status Fields

Description
Identifies the port channel with the Slot/Port interface naming convention.
Identifies the user-configured text name of the port channel.
The type of this Port Channel, which is one of the following:
• Static: The port channel is statically maintained.
• Dynamic: The port channel is dynamically maintained.
Select enable or disable from the pulldown menu. When the Port Channel is disabled
no traffic will flow and LACPDUs will be dropped, but the links that form the Port
Channel will not be released. The factory default is enable.
Indicates whether the link is Up or Down.
Shows whether the Spanning Tree Protocol (STP) Administrative Mode is enabled or
disabled on the port channel
Shows whether static mode is enabled for this port channel.
Shows whether to send traps when link status changes. If the status is Enabled, traps
are sent.
Lists the ports that are members of the Port Channel, in Slot/Port notation. There can
be a maximum of 8 ports assigned to a Port Channel.
Lists the ports that are actively participating members of this Port Channel, in Slot/Port
notation.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09