D-Link DWS-4026 User Manual page 549

Software User Manual
12/10/09
8 Configure the RADIUS accounting server information.
a. Go to the LAN > Security > RADIUS > Accounting Server page.
b. Select Add from Accounting Server Host Address field.
c. Enter 10.10.10.10 in the Accounting Server Host Address field.
d. Click Submit.
e. in the Secret field, enter secret and select the Apply option.
f. Click Submit.
9 To enable the RADIUS accounting mode, go to the LAN > Security > RADIUS > RADIUS Configuration page, select
Enable from the Accounting Mode menu, and then click Submit.
10 Create an authentication list.
a. Go to the LAN > Administration > Authentication List Configuration page.
b. Enter radiusList in the Authentication List Name field.
c. Click Submit.
d. Select RADIUS from the Method 1 menu, and then click Submit.
11 To set radiusList as the default login list for users that are not configured on the system, go to the LAN > Security > Port
Access Control > Login page, select radiusList from the Login field, and click Submit.
12 To enable IEEE 802.1X authentication on the switch, go to the LAN > Security > Port Access Control > Configuration
page, select Enable from the Administrative Mode menu, and then click Submit.
13 To set the 802.1X mode for port 1/0/1, go to the LAN > Security > Port Access Control > Port Configuration page,
select Force Authorized from the Control Mode field, and then click Submit.
Document 34CSFP6XXUWS-SWUM100-D7
D-Link Unified Access System
Configuring 802.1X Network Access Control Page 549