Arp Table Configuration; Figure 193: Arp Table Configuration; Table 174: Arp Table Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
ARP T C
ABLE ONFIGURATION
Use this page to change the configuration parameters for the Address Resolution Protocol Table. You can also use this
screen to display the contents of the table.
To display the page, click LAN > L3 Features > ARP > ARP Table Configuration in the navigation tree.
Field
Age Time (secs)
Response Time (secs)
Retries
Cache Size
Dynamic Renew
Total Entry Count
Peak Total Entries
Document 34CSFP6XXUWS-SWUM100-D7

Figure 193: ARP Table Configuration

Table 174: ARP Table Configuration Fields

Description
Enter the value you want the switch to use for the ARP entry ageout time. You must
enter a valid integer, which represents the number of seconds it takes for an ARP entry
to age out. The range for this field is 15 to 21600 seconds. The default value for Age
Time is 1200 seconds.
Enter the value you want the switch to use for the ARP response timeout. You must
enter a valid integer, which represents the number of seconds the switch waits for a
response to an ARP request. The range for this field is 1 to 10 seconds. The default
value for Response Time is 1 second.
Enter an integer which specifies the maximum number of times an ARP request is
retried. The range for this field is 0 to 10. The default value for Retries is 4.
Enter an integer which specifies the maximum number of entries for the ARP cache.
The range for this field is platform-dependent. The default value for Cache Size is 896.
This controls whether the ARP component automatically attempts to renew ARP
Entries of type Dynamic when they age out. The default setting is Disable.
Total number of entries in the ARP table.
Highest value reached by Total Entry Count. This counter value is restarted whenever
the ARP table Cache Size value is changed.
D-Link Unified Access System
Configuring ARP Page 281