Brother HL-2600CN Service Manual page 139

Code No.
12-1 NO TRAY
12 NO TRAY
12-2 STACKER FULL
12 STACKER
13 REPLACE TONER
13 REPLACE
* Display of [4]
C : YT Y Toner Cartridge
C : CT C Toner Cartridge
C : MT M Toner Cartridge
C : KT K Toner Cartridge
14-1 CHECK FUSER OIL
14 CHECK
14-2
CHECK CLEANING ROLLER
14 CHK
LCD Message
UPP/LOW
[*1]
[*4]
FULL [SF]
[*5]
TONER [*4]
FUSER OIL[*F0]
CLEANING
ROLLER [*FC]
V-14
Description of Message
x
The engine is idling.
x
The Power LED is lit.
[*1]: Paper feeder without the paper
cassette is indicated as follows;
/UPP: Upper Cassette
/LOW: Lower Cassette
x
Install the applicable media cassette
to the paper feeder indicated on the
LCD.
x
Engine stands by as "STACKER
FULL" status.
x
The Power LED is lit.
x
Remove the paper on the stacker
(paper exit tray) , and then press –
button.
x
The engine is idling.
x
The Power LED is lit.
[*5]: The toner empty condition is
indicated by the color code as
follows;
Y: Yellow
M: Magenta
C: Cyan
K: Black
x
Replace the indicated toner cartridge
with a new one of the correct color.
x
The engine is idling.
x
The Power LED is lit.
x
Replace the fuser oil bottle with a new
one.
x
This message will be automatically
cleared by open & close operation of
the paper exit cover.
x
The engine is idling.
x
The Power LED is lit.
x
Replace the cleaning roller with a new
one.
x
Execute the Clear Care Mode after
the replacement of the cleaning roller
to clear the Care Code [FC].