Install The Opc Belt Cartridge - Brother HL-2600CN Service Manual

3.2

Install the OPC Belt Cartridge

N
Do not directly touch the OPC belt surface with bare
hands or gloves.
N
If the OPC belt is exposed for more than two minutes
under the light of 800 lux, the belt may be damaged.
1) Open the front cover and the paper exit
unit cover 2 by releasing the latches.
When installing or removing the OPC
belt, be sure to open the front cover
first. Failure to do so will cause the
OPC belt to be damaged due to
contact with the toner cartridges.
2) Release the belt cartridge lock levers
(left & right).
CAUTION
III-6
Paper exit unit
cover 2
Front cover
Fig.3-6
Belt cartridge lock lever
Fig.3-7