Brother HL-2600CN Service Manual page 181

1.2.3 Cleaning the Paper Discharger
The paper discharger should be cleaned according to the periodic maintenance
cleaning cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2
Cotton swab (2
<Cleaning Procedure>
1) Turn off the remote switch and power supply, and unplug the power code.
2) Open the transfer unit 2.
3) Remove the paper discharger unit.
i) Sliding AC charger to the arrow direction, release it from the locking craw.
ii) Pull the paper discharger unit upwards to remove it from the holder of the
transfer unit 2.
3 pieces)
3 pieces)
AC charger
Fig.6-4
Transfer unit 2
Fig.6-5
VI-10
Locking craw
Paper discharger