Brother HL-2600CN Service Manual page 183

1.2.4 Cleaning the OPC Belt Cartridge
The OPC belt cartridge should be cleaned according to the periodic maintenance
cleaning cycle set out in Table 6-3.
If the belt is exposed for more than two minutes to a light
source of 800 lux, the belt may be damaged.
Do not directly touch the OPC belt surface with bare
hands or gloves.
<Tools to Prepare>
Cotton cloth (2
<Cleaning Procedure>
1) Turn off the remote switch.
2) Open the paper exit unit cover 2 and the paper exit front cover 2.
3) Release the belt cartridge lock levers to pull out the OPC belt cartridge.
4) Clean the OPC belt cartridge with a cotton cloth.
i) Remove any toner on the back of the OPC belt cartridge.
3 pieces)
OPC belt cartridge
Fig.6-8
VI-12