Brother HL-2600CN Service Manual page 252

4.3.6 High Voltage Unit 2
1) Disconnect all the harness connectors (3 pcs.) connected to the high voltage unit 2.
2) Remove the set screws ST3X6 (1 pc.) and BT3X8 (8 pcs.) from the high voltage unit
2.
3) Remove the high voltage unit 2 from the frame.
High voltage unit 2
Fig.7-56
WARNING
The high voltage power supply unit generates high voltages of up to 5KV. You can get an
electric shock if you touch the unit while it is powered on.
Turn on the power to the unit only after having refitted and secured side cover (L) 2.
VII-40