Brother HL-2600CN Service Manual page 22

No. Part Name
1 Top Cover ASSY 2
2 Control Panel
3 Front Cover 2
4 Paper Exit Unit
5 Power Button
6 Power Inlet
7 Rear Access Cover
8 Controller Box
9 Paper Exit Unit Cover 2
10 Paper Stopper A
11 Paper Stopper B
Outline of Functions
To act as an upper enclosure and also as a
paper tray for printed paper.
To display the status of printer operation.
To act as a front enclosure, opened when
replacing a toner cartridge or waste toner pack.
To exit a printed paper onto a top cover ASSY 2,
acting also as paper tray for printed paper.
To be opened when replacing an OPC belt
cartridge.
To operate power-on and off to the printer.
(Push for On/Off operation)
To connect a power supply cable.
To act as a rear enclosure, opened when
clearing an internal jam or doing maintenance
work.
Space for a controller PCB to be installed.
Cover to be provided at duplex transportation
inlet and to be removed when installing the
duplex transportation unit.
Stopper to be erected for alignment of exited
papers and also prevention of falling down.
Stopper to be erected for preventing exited
papers from falling down.
I-5