Brother HL-2600CN Service Manual page 264

4.4.3 Paper Sensor (F. CL)
1) Remove the set screw ST3X6 (1 pc.) and lift the FCS cover ASSY to release the
three hooks. Remove the paper sensor (F. CL) from the FCS cover ASSY.
2) Disconnect the harnesses connector connected to the paper sensor (F. CL).
FCS cover ASSY
4.4.4 Paper Sensor (EXF)
1) Disconnect the harnesses connector connected to the paper sensor (EXF).
2) Release the three hooks to remove the paper sensor (EXF) from the P. EX frame
ASSY.
Paper sensor (F. CL)
Fig.7-72
Hook
Hook
Fig.7-73
VII-52
Hook
Hook
Paper sensor (EXF)