Inner Jam; Outer Jam; Others - Brother HL-2600CN Service Manual

3.2

Inner Jam

Problem Item Step
1
2
Transfer unit 2 3
4
5
6
Fusing Unit 7
8
3.3

Outer Jam

Problem Item Step
Print Paper 1
1
Paper Exit Unit
2
3.4

Others

Problem Item
The edge of Is the curled paper edge creased when
print paper is the paper is loaded through the pick-up
creased. roller?
Check Item
Open the transfer unit 2 and
check.
Is there any paper inside the
unit?
Is the transfer roller 2 firmly
locked by the lock lever?
Is the paper discharger unit
installed in place?
Is there paper dust around the
registration roller 2?
Is the wire of the paper
discharger unit damaged?
Is the fusing unit installed in
place?
Is there any paper trapped
between the rollers?
Is there fuser oil still in the oil
bottle?
Check Item
Is the print paper a
recommended paper?
Is the paper exit unit firmly
locked by the lock lever?
Is there paper dust around the
exit roller?
Cause
Result Action
Remove the paper
YES
inside.
Fix the transfer roller 2
NO
with the lock lever.
Install the paper
NO
discharger unit firmly
in place.
Clean the registration
YES
roller 2 with a cotton
cloth.
Replace the existing
YES
paper discharger unit
with a new one.
Install the fusing unit
NO
firmly in place.
Remove the trapped
YES
paper.
Replace the existing
NO
oil bottle with a new
one.
Result Action
Use a recommended
NO
paper.
Open and close the
NO
paper exit unit again.
Clean the exit roller
YES
with a cotton cloth.
Result Action
Turn over the paper in
YES
the media cassette.