6.2
OPC Belt Cartridge
1) Open the top cover ASSY 2 and
remove the OPC belt cartridge from
the printer.
2) Open the shutter on the OPC belt
cartridge and remove toner in the
cartridge with a vacuum cleaner.
3) Cover the OPC belt cartridge with
the original protective sheet (black).
4) Put the cartridge into the
polyethylene bag.
5) Put the OPC belt cartridge into the
original starter kit packing.
x
Do not directly touch the OPC belt surface with bare hands or gloves.
x
If the belt is exposed for more than two minutes to a light source of 800 lux, the belt
may be damage.
x
If you do not have the original starter kit packing, pack the OPC belt cartridge firmly
with bubble sheet and put it into the outer carton.
Protective sheet
OPC belt cartridge
A-13
Shutter
Starter kit packing