To Install The Printer Correctly - Brother HL-2600CN Service Manual

8.

TO INSTALL THE PRINTER CORRECTLY

Please read the installation steps described below carefully.
If the printer is not installed correctly, image failures may occur or the life expectancy of
the OPC belt cartridge may be shortened.
1) Turn ON the power switch of the printer.
2) After the printer has initialized, open the front cover 2 and then the top cover ASSY
2 of the printer and pull up the OPC belt cartridge from the printer.
OPC belt cartridge
3) Measure the gap on the OPC belt cartridge shown in the figure below. If the gap is
in the range of 5 ± 2 mm, the printer is installed correctly.
5 ± 2 mm
A-35