Brother HL-2600CN Service Manual page 277

4.6.2 Transfer Roller 2
1) Lift the transfer roller lock levers at the right and left hand sides to remove the transfer
roller 2 from the transfer unit 2.
Transfer roller 2
4.6.3 Registration Roller 2
1) Remove the roller fixing C rings from both ends of the roller.
2) Remove the gear from the shaft (right hand side).
3) Remove the plastic bushes at both ends.
4) Remove the shaft support from the frame while pressing down on the pressure roller
to release the pressure from the registration roller 2.
5) Remove the registration roller 2.
C ring
Plastic bush
Transfer lock lever
Transfer unit 2
Fig.7-91
Registration roller 2
Transfer unit 2
Fig.7-92
VII-65
Plastic bush
Gear
C ring