Brother HL-2600CN Service Manual page 180

1.2.2 Cleaning the Transfer Roller 2
The transfer roller 2 should be cleaned according to the periodic maintenance
cleaning cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2 3 pieces)
<Cleaning Procedure>
1) Turn off the remote switch and power supply, and unplug the power code.
2) Open the transfer unit 2.
3) Using a cotton cloth, clean the transfer roller 2.
Transfer roller 2
Transfer unit 2
Fig.6-3

CAUTION
NEVER use alcohol or similar solvents for cleaning the transfer roller 2.
VI-9