Brother HL-2600CN Service Manual page 273

4.5.6 Hinge Base 2 (L, R)
1) Remove the C ring (1 pc.) to remove the (shaft) from the hinge base 2.
2) Remove the hinge base 2 from the front cover unit 2.
3) Remove the pin (1 pc.) of the bearing to remove the two bearings and (spring) from
the hinge base 2.
4) Remove the hinge base 2 at the other side as well.
Fig.7-86
Hinge base 2
Bearing
(spring)
Fig.7-87
VII-61
(shaft)
Hinge base 2
C ring
Pin
Bearing