Brother HL-2600CN Service Manual page 262

5) Remove the set screws BT3X8 (4 pcs.). Bend the top of the paper exit unit slightly as
shown in the figure below and release the top end of the paper exit front cover 2 from
the paper exit unit to remove it.
6) Remove the set screws (2 pcs.) to remove the (P. EX frame holders R/L) from the
paper exit cover 2.
(P. EX frame holders L)
Paper exit front cover 2
Paper exit cover 2
7) Remove the set screws (4 pcs.) to remove the P. EX frame ASSY from the paper exit
cover 2.
P. EX frame ASSY
Paper exit cover 2
(P. EX frame holders R)
Fig.7-69
Fig.7-70
VII-50