Fujitsu F2MC-8L F202RA Hardware Manual page 172

CHAPTER 7 8-BIT PWM TIMER
MOV CNTR, #11001010B ; Starts PWM operations, internal clocks, and count operations.
"H"
Depending on the port
state
"L"
(2) When OE is set after TPE and P/TX are set:
MOV CNTR, #11001000B ; Starts PWM operations, internal clocks, and count operations.
MOV CNTR, #11001010B ; Enables PWM output.
"H"
Depending on the port state
"L"
156
; Enables the PWM output.
1/4 instruction cycle
Executing the instruction to enable PWM output
; Uses the general-purpose port.
Check
Check
Executing the instruction to enable the PWM output