Daylight Saving Time; Loss Of Main Power Source; Evacuate - Panasonic MEW01 351 Planning Manual

Panasonic Electric Works Nordic AB
MEW01351 Rev: -
16.28.1
16.29
16.29.1
16.29.2
16.30
Planning Instructions Fire alarm system EBL512 G3, V1.1.x

Daylight saving time

The time is automatically changed when the Daylight saving time
period starts and stops respectively, if set so in WinG3. When, is
depending on which convention that is used:
 Australian convention: Forward 1 hour the first Sunday in
October, 02:00  03:00. Backward 1 hour the first Sunday in
April, 03:00  02:00.
 New Zealand convention: Forward 1 hour the last Sunday in
September, 02:00  03:00. Backward 1 hour the first Sunday
in April, 03:00  02:00.
 All other conventions: Forward 1 hour the last Sunday in
March, 02:00  03:00. Backward 1 hour the last Sunday in
October, 03:00  02:00.

Loss of main power source

Regarding the Main power source and Second power source, see
chapter "Power supply", page 152.
Fault: Loss of main power source
The delay time for the fault "Loss of main power source" can be set
(in WinG3) to 1 – 300 minutes. (A delay time > 30 minutes is a
violation to the EN54-2 standard.
LCD backlight
In order to reduce the current consumption the LCD backlight will
never be turned on during loss of the main power source.
Exceptions
 Australian convention: The LCD backlight will be turned on
also during loss of the main power source.
 New Zealand convention: The LCD backlight will be turned on
also during loss of the main power source.

Evacuate

When the soft key "Evacuate" (P7)
programmed for sounders (i.e. type "Alarm devices"), will be
collective turned ON (steady). This is indicated in the LCD:
Evacuate in progress
112
The soft key "Evacuate" is only visible / valid for the Belgian, British
Standard, Hungarian, Spanish and Ukrainian conventions.
113
Alt. when a programmable input is activated. One input per c.i.e.
114
112 113
is pressed , all outputs