Panasonic MEW01 351 Planning Manual page 40

Panasonic Electric Works Nordic AB
MEW01351 Rev: - Planning Instructions Fire alarm system EBL512 G3, V1.1.x
The following units can be connected to the COM loops (in
NORMAL mode):
NOTE!
The
Alarm Acknowledge Facility Control (AAFC)
Australian market only.
The
I/O Unit for Fan control (3361)
control panel 4593 only.
The
MCP Addressable Manual Call Point with Isolator 4333
product under construction, i.e. cannot be used today.
(listed below) can be found in old installations and can
Obsolete units
be used in EBL512 G3 installations as well.
NOTE!
When one or more of the
COM loop, the maximum number of loop units is 127, i.e. only
technical address 1-127 can be used.
Address setting
Each COM loop unit has to have a unique COM loop address (001-
255). This address and the mode are set with an Address Setting Tool
(3314). For EBL512 G3 is always the NORMAL mode used
(default).
is used on the
is normally used with the Fan
listed above are used on a
Obsolete units
38
is a future