Panasonic MEW01 351 Planning Manual page 163

Panasonic Electric Works Nordic AB
MEW01351 Rev: - Planning Instructions Fire alarm system EBL512 G3, V1.1.x
Item
General fire alarm via progr. input
External fault via progr. input
Programmable outputs (= control
148
expressions)
Addressable 2 voltage outputs unit
3364
Interlocking Combinations
Presentation numbers / alarm points
that can be presented in the display(s)
in case of fire alarm
Presentation numbers
programmed
151
Zones that can be programmed
Faults
Disabled zones
Disabled alarm points (zone/address) +
Disabled COM loops
Disabled outputs
Disabled interlocking outputs
Sensors activating SERVICE signal
Max. number of AAF zones
(Max. 5 detectors per AAF zone.)
148
Approx. 4000 trigger conditions can be used in these control expressions.
149
Max. 100 user definable texts can be displayed "at the same time".
150 Presentation number is a ZONE only or ZONE – ADDRESS.
151
Any zone number between 001 and 999 can be used for the 512 zones.
152
Theoretically 999 zones can be programmed but according to EN54-2 it
shall be possible to present all "fire alarms" in the display, i.e. max. 512.
153
Zone/address disabled via time channel not included.
154
Control outputs disabled via menu H2/B7 and Alarm devices disabled via
menu H2/B8 not included.
155
Interlocking outputs disabled via menu H2/B7 not included.
156
Used in conjunction with the AAF Control, which is available on the
Australian market only.
161
C.i.e.
250
512
40
200
150
512
150
that can be 512
512
100
156
System
50
149
1000
512
30 x 512 =
15 360
152
512
300
512
153
200
154
200
155
200
100