Notation Sytem For Data In Command/Response Messages - Panasonic LightPix AE20 User Manual

6.2.3 Notation Sytem for Data in Command/Response Messages

The data in command/response messages are described in the following two systems:
Decimal Data
n
x 10 : Decimal data
Condition
Data register "2100" is
specified.
Hexadecimal Data
n
x 16 : Hexadecimal data
Condition
Integer data "200" is
specified.
112
System
Register No.: Five
characters
0 2 1 0 0
System
Writing data: Four
characters
C 8 0 0
Low High
Description
The specified format for data register of WD
command is as follows:
Register No.: Five characters
ASCII
characters
4
x 10
Just specify "02100" as decimal data.
Description
Data format used for WD command is as
follows:
Writing data: Four
ASCII
characters
1
x 16 x 16
Low
If the condition data "200" is represented in
hexadecimal numbering system, it will be
"00C8" for ASCII characters. If low and high
are switched in accordance with the format
above, the number will be "C800".
0 3 2
x 10 x 10 x 10 x 10
characters
ASCII
0 3 2
x 16 x 16
characters
High
ASCII
1
characters