Operation in TEACHING mode
Operation in TEACHING mode differ the type of teaching. (The type of teaching is
settable in CONFIGURATION mode.)
The number in < > in the table below represents the button number of the operation
unit (see the figure on the right).
TEACH: OK (teaching for OK product only)
In INSPECTION (or RUN)
mode
In TEACHING mode ("TEACH" is displayed)
TEMP: Saved template
The saved template image is
displayed at the left upper
area on the finder unit.
Exposure time: 0.03 ~ 50.00 ms (default:
1.93)
<7> : Shortens the exposure time
<8> Extends the exposure time
If you want to perform a teaching at this point,
press <6> and then <1>
SIZE: Resizes inspection area
If you want to perform a teaching at this point,
press <6> and then <1>.
MOVE: Moves the inspection area
you want to execute a teaching, press <6> and
then <1>.
T.SIZE: Resizes the Color Extraction area
If you want to execute teaching, press <6> and
then <1>.
T.MOVE: Moves the Color Extraction area
If you want to execute a teaching at this point,
press <6> first and then <1> after resizing.
M.SIZE: Resizes the template area
If you want to perform a teaching at this point,
press <6> and then <1>.
M.MOVE: Moves template area
If you want to perform a teaching at this point,
press <6> and then <1>.
The <6> button: Executes a teaching
Teaching is performed for OK products of the
current product type.
ADJ: Teaching is being performed
Values (two digits): The degree of similarity
detected during the test run
When the unit completed a teaching, the
degree of similarity appears in the ADJ display
area.
<5>: Returns to the top.
NO TEMP:
When no
template is
saved
Product
switch
Press <2> and
<5> at the same
time to change
the product
types.
Display of
teaching
completion
Execute a
teaching If
teaching is
successfully
completed by
the time of
inspection area
move, "DONE"
is displayed a
the upper line
Example:
53