Panasonic LightPix AE20 User Manual page 46

TEACH: OKNG (when perform a teaching for OK and NG products)
In INSPECTION (or RUN)
mode
If the ALARM signal is output after teaching is completed, the signal is held ON until teaching is
successfully completed. As long as the unit keeps outputting the ALARM signal, it cannot properly
execute an inspection. In this case, you have to execute a teaching again.
In TEACHING mode ("TEACH" is displayed.)
Exposure time: 0.03 to 50.00 ms
(default: 3.05)
<7>: Allows you to decrease
exposure time up to 0.03
<8>: Allows you to increase up to
50.00
SIZE: Resizes inspection area
If you want to perform a teaching at
this point, press the <6> and then
the <1>.
MOVE: Moves inspection area
If you want to execute a teaching at
this point, press the <6> and then
the <1>.
T.SIZE: Resizes the Color
Extraction area
If you want to execute a teaching at
this point, press the <6> first and
then the <1> after resizing.
T.MOVE: Moves the Color
Extraction area
<6>: Executes a teaching
Executes a teaching for OK product
of the current product type
STNG: Indicates successful
completion of teaching for OK
products
<6>: Executes a teaching for NG
products
Executes a teaching for NG product
of the current product type
DONE: Indicates successful
completion of NG product
teaching
FAIL: Indicates unsuccessful
completion of teaching
(the ALARM signal is output).
<5>: Returns to the top.
You can always
change the
product types by
pressing the <2>
and <5> buttons
at the same time.
Example.
39