Conditions under which measuring result are judged as OK
If the inspection results fulfill the following conditions, the LightPixAE20 judges them as OK.
Can find out the length in the direction of the object in the color specified in CONFIGURATION mode
The measured length does not exceed the limit (the length value for which teaching was executed +/-
allowable limit)
Example
Settings of teaching and judgement criteria
OK judgement
NG judgement
Cannot detect the color of the
inspection object
The inpsection length is beyond a
base length value +/- allowable
range.
If the color of the inspection object=black
and detection direction=X.
Since the color of the inspection
object is black, the
maximum/minimum values for the
inspection length are set to fill the
entire screen, resulting in
exceeding base length +/-
allowable range.
83