Panasonic FP-D250 User Manual page 107

1) Removal of the paper feed roller/storage roller/F/R mylar/feed roller pad
1 3
2
1
2
4
6
10
8
9
5
3
2
1
1
2
4
3-34
(1) Pull out the ADU until it stops.
(2) Remove the upper cover (2 screws).
(3) Open the transport guides (1 and 2).
(4) Remove the screws (x 2).
(5) Remove the stopper plate.
(6) Remove the touch rings from the guide
plates.
6
(7) Disconnect the feed clutch connector.
(8) Remove the touch rings (x2).
(9) Move the bearing toward the feed rollers.
9
(10)Remove the paper feed roller shaft.
(1) Remove the touch ring.
Note: Remove all of the rollers by sliding them
in the direction of arrow.
(2) Remove the paper feed roller.
(1)Perform steps (1) through (10), above.
(2)Take off the F/R mylar assembly.
Note: Remove paper feed roller first.