Panasonic FP-D250 User Manual page 472

Code
Item
No.
c00 All list print out
c01 A code No. for Key Operator
c02 Total count
c03 Preventive maintenance
total count
c04 Developer count
c05 Fuser cleaning web count
c06 ADF original feed total count
c07- Not used
c08
c09 Duplex unit total count
c10 Sheet bypass count
c11 Copier lower paper drawer count
c12 System console upper paper
drawer count
c13 System console middle paper
drawer count
c14 System console lower paper
drawer count
c15 LCC count
(3000 sheet paper drawer)
c16 Copier upper paper drawer count
(When duplex unit is not installed.)
c17 Scanner PM count
c18 Scanner read count
c19 Scan operation count
5-34
Function
Prints each counter and their readings in one
sheet.
Procedure : (1) Select the F7-00 code.
(2) Select 'Yes' to print out the list.
(3) Press the start key.
Identification code number for access to counter
mode in the User choice.
Total count of all copies / prints.
PM count of all copies
NOTE: When the service call indicator turns ON,
the PM count is cleared.
Total elapsed copies since the last developer
change. (F8-09)
Possible number of copies until replacement of
web roller.
Total count of originals fed.
Total count of paper fed from the duplex unit.
Total count of paper fed from the sheet
bypass.
Total count of paper fed from the lower drawer
of the copier.
Total count of paper fed from the upper stage of
the optional system console.
Total count of paper fed from the middle stage
of the optional system console.
Total count of paper fed from the lower stage of
the optional system console.
Total count of paper fed from the optional LCC.
Total count of paper fed from the upper drawer
of the copier.
NOTE: When the duplex unit is installed to the
upper stage of the copier, this code does
not count up.
PM count of scans used as the copier.
Total count of scanner read.
Total count of scan operation.