(2) Unpacking
Remove all shipping materials before installation.
Caution : Make sure the copier is unplugged before the installation.
Location
1
2
1
3
Procedure
(1) Remove the copier rear cover.
(7 screws)
(2) Remove the cable cover (Plastic).
(2 screws)
2
(1) Remove the copier top right cover.
1
(2 screws)
(2) Remove the pre-stamped knock
out from the top right cover.
2
(1) Install the Zip drive unit.
(3 screws)
Check
6-29