Preventive Maintenance; Precautions For Preventive Maintenance Service - Panasonic FP-D250 User Manual

Section III Preventive Maintenance
Preventive maintenance is performed at specific intervals and consists of machine
cleaning and parts replacement.
It is essential to perform these service activities properly and at the specified intervals
for customer satisfaction.
The purpose of this service is to maintain machine performance and image quality.

3.1 Precautions for Preventive Maintenance Service

• You should prepare the necessary PM kits, replacement parts, and tools for
cleaning beforehand.
• After completing the preventive maintenance service, you should discard the
used parts and packaging, in accordance with local regulations and clean
surrounding area.
• Before servicing the equipment disconnect the power cord from the wall outlet.
Note : FP-D450/D600 only
Bofore disconnecting the power cord, please open the front door and
exit door.
• Before using solvents such as IPA (Isopropyl alcohol), put on rubber gloves
and eye protection.
1 Timing
• Perform the preventive maintenance service in accordance with the chart of
preventive maintenance areas listed in the service manual.
2 Cleaning of rollers
• Rollers should be cleaned with water and cloth.
• Use of IPA (Isopropyl alcohol) should be used sparingly.
3 Precautions for disassembly and adjustment
• Before disassembling the machine, disconnect the power cord from the wall
outlet.
Note : FP-D450/D600 only
Bofore disconnecting the power cord, please open the front door and
exit door.
• After taking the unit apart, do not attempt to operate the machine.
• When operating the machine with covers removed, be careful to avoid clothing
being caught by moving components.
• When electricity is applied, the connectors on any P.C.B. must not be connected
or disconnected.
3-1