Panasonic FP-D250 User Manual page 440

Service
Item
mode
F3 Continuous copying
F4 Input / Output check
F5 Function programming
F6 Adjustment and
programming
F7 Electronic counter
F8 Operating adjustment
F9 System
Administration
5-2
Function
1. Multi copies are made 1. Total and electronic
when the Start key is
pressed. 2. If paper is in drawer, the
2. Duplex mode (1 sided
original to 2 sided copy or
2 sided original to 2 sided 3. If no paper is in drawer,
copy)
a) 50 sheets are copied
when the Start key is 4. ADF and Finisher can
pressed in the duplex
mode. The first side is
copied and fed into the
duplex unit tray.
b) When the Start key is
pressed again, the
second side is copied
and fed to the copier exit
tray.
3. Book mode (book original
to 2 sided copy)
a) 50 sheets are copied
when the Start key is
pressed in the duplex
mode. The first side is
copied and fed into the
duplex unit tray. Then
second side is copied
and fed to the copier
exit tray.
The functioning of Input /
Output items (selected item
numbers) is checked.
Various function settings
(selected by code numbers)
can be changed.
Various function setting
(selected by code numbers)
can be adjusted.
R e a d s o r R e s e t s t h e
electronic counter.
Perform pseudo-operation of
an item (selected by code
numbers)
Input the telephone number,
displays software version and
list print of F5/F6 modes.
Remarks
counter are disabled.
misfeed circuit is
enabled.
the misfeed circuit is
disabled.
be operated.