Panasonic FP-D250 User Manual page 538

Location
Note 1 : FP-D450/D600 only
Please instruct the customers on following items.
1) Power ON/OFF should be done by the operation switch on the control
panel.
2) Do not use the power switch in the machine as it is for service use only.
Note 2 : 1) Refer to optional accessories service manual in order to install
optional accessories.
2) When the FA-A888 is installed onto FP-D250/D350 series, connector
position of the main CPU PCB needs to be changed, For details, refer
to the FA-A888 Installation Procedure
6-12
Shipping material/Procedure
Lead edge registration adjustment
(1) Press the "User Preset", "Ledger /
A3 of Original Size", and "3" keys
simultaneously to enter the service
mode.
(2) Press the "6" key to enter the F6
mode.
(3) Press the Start key.
(4) Press the "0", "5" keys to enter the
F6 mode code "05".
(5) Press the Start key.
(6) Enter the new content.
Note : The "Reset" key is used to
enter the "–" content.
(+): Paper feed timing is
delayed.
(–): Paper feed timing is
advanced.
(7) Press the "Start" key.
(8) Press the "Clear" key twice to
return to F mode.
(9) Press the "2" key to enter the F2
mode.
(10)Make a copy to confirm the
adjustment. Perform step (6)
again, if necessary.
(11)Press the "User Preset" key and
"Clear" keys simultaneously to exit
the service mode.
Check