Panasonic FP-D250 User Manual page 562

Location
2
3
2 1
3
4
3
4
1
3
4
6-36
Shipping material/Procedure
(1) Remove the hard disk mounting
bracket. (right) (2 screws)
Note: When the hard disk drive
for printer (FA-HD01) is
already installed. Remove
1
IDE harness and power
harness for the hard disk,
then remove the mounting
bracket.
(1) Remove the IDE signal harness
from IDE connector on the hard
disk drive for filing.
(2) R e m o v e t h e p o w e r s u p p l y
harness from the filing hard disk
drive.
(3) Remove the hard disk mounting
bracket (left) together with the
filing hard disk. (2 screws)
(1) Install the backup hard disk drive
in the front compartment
(4 screws).
(2) Reinstall the hard disk drive
mounting bracket (left).
(3) Connect the IDE signal harnesses
to the IDE connectors on both
hard disk drives. (2 harnesses)
(4) Connect the power supply har-
nesses to the hard disk drives.
(2 harnesses)
2
(5) Reinstall the hard disk bracket
(right). (2 screws)
(Connect the harness if the hard
disk drive for printer is installed.)
(6) Reassemble in the reverse order.
Check