2) Removal of the ozone filter 1, 2, 4 and 5
4
(Rear side)
2
(Left side)
5
Ozone filters
6
Pin
Toner hopper unit
Manual paper feed knob
Inner
cover 2
Ozone filter 5
Ozone filter 4
Ozone duct 2
3-38
(1)Remove the rear cover. (4 screws)
(2)Remove the ozone filter 2.
(1)Open the front door.
(2)Open the exit door.
(3)Remove the filter holder (2 screw).
(4)Remove the ozone filter 1and 4.
(Ozone filter 4 : FP-D250/D350/D350H)
Only FP-D450/D600
(1)Perform the procedures of the fuser unit
removal and remove the fuser unit.
a) Open the toner hopper unit.
b) Remove the pin.
c) Remove the manual paper feed knob.
d) Remove the inner cover 2.
e) Remove the fuser unit.
(2)Remove the ozone filter 4 and 5.