Panasonic FP-D250 User Manual page 442

Code
Function
No.
c00 a) Paper limit sensor 2
b) Paper limit sensor 1
c01 a) Registration roller paper pass
sensor
b) Duplex unit paper length
guide home position sensor
c) Duplex unit paper width guide
home position sensor
d) Shift tray registration sensor
c02 a) Total counter
b) Paper level sensor 2
c) Paper detection sensor 2
d) Paper pass sensor 2
e) +12V line error detecting
signal
f) Paper level sensor 1
g) Paper detection sensor 1
h) Paper pass sensor 1
c03 a) Waste toner bottle full sensor
b) Toner bottle position sensor
c) Main motor lock signal
d) Exhaust fan motor lock signal
2
e) Exhaust fan motor lock signal
1
f) Suction fan motor lock signal
g) Dust collecting fan motor lock
signal
h) Exhaust fan motor lock signal
4
c04 a) Exhaust fan motor lock signal
3
b) Copier front door open / close
sensor
c) Paper exit sensor
d) High voltage leak detection
(Transfer corona)
e) High voltage leak detection
(Separation corona)
f) High voltage leak detection
(Charge corona)
5-4
Condition
7 6 5 4 3 2 1 0
Paper is full.
Paper is full.
Paper is not detected.
Paper length guide in home
position.
Paper width guide in home
position.
Paper is not detected.
Total counter is not
connected.
Paper is empty or tray is
pulled out.
Paper is not detected.
Paper is not detected.
+12V line is normal.
Paper is empty or tray is
pulled out.
Paper is not detected.
Paper is not detected.
Waste toner is full.
Toner bottle in home
position.
Motor is locked.
Motor is locked.
Motor is locked.
Motor is locked.
Motor is locked.
Motor is locked.
Motor is locked.
Door is opened.
Paper is not detected.
Normal.
Normal.
Normal.
Message display