Panasonic FP-D250 User Manual page 453

Code
Item
No.
c110 Finisher bin movement 2
c111 Finisher paper transport motor
c112 Finisher paper exit motor
c113 Finisher tamper drive motor
c114 Finisher staple motor
c115 Finisher staple swing motor
c116 Finisher belt motor
c117 Finisher gate change solenoid
c118 Finisher hole punch
c119 Not used
c120 Exhaust fan motor 4, 5
(FP-D450/D600)
c121 LSU fan motor
(FP-D450/D600)
c122 Pre-separation LED
(FP-D450/D600)
c123 Not used
~149
c150 +24V output control (Scanner)
c151 Exposure lamp
Function
For FA-F320
The bin moves lower direction, then moves up
to the home position.
For FA-F350
The top bin position moves forward #1 bin
position.
Paper transport motor rotates.
Paper exit motor rotates.
Tamper drive motor rotates.
The stapler operates one time, then resets.
Staple swing motor rotates.
Belt motor rotates.
The solenoid turn on/off for one second cycle.
The hole punch operates one time, then resets.
When CN18-15 is +24V fan motor 4 rotates.
When CN18-18 is +24V fan motor 5 rotates.
When CN32-1 becomes 0V, fan motor rotates.
When CN18-12 becomes 0V, lamp lights up.
(FP-D250/D350)
When signal is sent from main CPU
LVPS, +24V is supplied to +24V line
(FP-D450/D600)
When signal is sent from main CPU
LVPS, +24V is supplied to +24V line
(FP-D250/D350)
When CN17-5 is +24V, lamp lights up.
Lamp turns off after 4 seconds.
(FP-D450/D600)
When CN17-5 is +24V, lamp lights up.
Lamp turns off after 4 seconds.
CN1-1 to
CN1-1 to
5-15