Location
11
2
2
12
For filing
2
2
2
1
1
1
13
14
2
6-18
Shipping material/Procedure
(1) Connect the control panel (D)
1
harness to the control panel (D)
PCB.
(2) Install the control panel (D) PCB
onto the control panel. (2 screws)
(1) Remove the control panel cover
Note:Unhook the 3 positions of
the control panel cover to remove.
(2) Install the control panel buttons.
(3 pcs.)
(3) Install the LED windows. (3 pcs.)
(1) Install the control panel cover.
(2) Reassemble control panel.
1
For Printer: Use the control panel cover
with two(2)button hole type.
*keep three(3)button hole
type cover and "save"
button for future up-grade.
For DDfiling: Use the control panel cover
with three(3)button hole
type.
(1) Attach the seal for printer, if
applicable.
(2) Attach the seal for network, if
applicable.
1
Check