5. F6 mode Adjustment and programming
Set the copier to service mode and press Multi-Copy key "6".
Press the Start key.
Select the desired code number with touch panel display and touch the OK key.
If you wish to select other code number, scroll the menu with arrow keys (
The display will indicate current setting.
Touch the Input key on the touch panel display and input the new setting number
with Multi Copy key.
Increase : Multi Copy key.
Decrease : Reset and Multi Copy key.
When the OK key is touched on the touch panel display, the setting is changed
and is now stored in memory.
When CANCEL key is touched, the desired code input will not be accepted.
Press the Clear and User Preset key to escape service mode.
Code
Item
No.
c00
Main-scan direction
magnification ratio
(vertical position to the
paper feed direction)
(standard = 100%)
c01
Sub-scan direction
magnification ratio
(parallel position to the
paper feed direction)
c02
100% selection
(Ratio of vertical and
parallel position of the
paper feed direction
c03
Not used
c04
Original registration
detecting timing
5-24
Function
Adjustment of ratio for
0.10%
vertical position when
(–9 to +9)
scan is made
(+): Enlargement
(–): Reduction
Adjustment of ratio for
0.10%
parallel position when
(–9 to +9)
scan is made
(+): Enlargement
(–): Reduction
Adjustment
0.10%
from 99.1%
(–9 to +9)
to 100.9%
(+): Enlargement
(–): Reduction
Adjustment of original
0.2mm
registration detection
(–30 to +30)
timing .
(+): Delayed
(–): Advanced
)
Remarks