Viewing The Settings; Direction; Relay Version - Toshiba GRE110 Instruction Manual

• Press the
or
pressing the
4.2.4.7

Direction

The direction display is available at model 820 and 821.
To display thedirection of earth fault current for testing, do the following:
• Select "Status" on the "MAIN MENU" screen to display the "Status" screen.
• Select "LCD contrast" to display the setting screen.
At normal condition, display "-------". If the Ise input dirrection is same as Ve, displayed
"Forwaed". If the Ise input direction is same as –Ve, displayed "Reverse".

4.2.5 Viewing the Settings

The sub-menu "Set. (view)" is used to view the settings made using the "Set. (change)".
The following items are displayed:

Relay version

Description
Relay address and baud rate in the Modbus communication or optional communication.
Record setting
Status setting
Protection setting
Binary input setting
Binary output setting
LED setting
Control setting
Frequency setting
Enter an item on the LCD to display each item as described in the previous sections.
4.2.5.1 Relay Version
To view the relay version, do the following.
/ 2 L C D C o
■ ■ ■ ■
key to adjust the contrast. The characters on the screen become thin by
key and deep by pressing the
/ 2 D i r e c t
I s e - -
 99 
n t r a s t
key.+
i o n
- - - - -
6 F 2 T 0 1 7 2