Toshiba GRE110 Instruction Manual page 337

ID Description
Go17 What is the behavior when a
subscribed GOOSE message is "test"
Go18 What is the behavior when a
subscribed GOOSE
"ndsCom"
Go19 Acceptable data type
Go20 Dataset structure of a subscribed
GOOSE
Go21 What is the behavior when the
device starts up?
Go22 Is it supported to set the "ndsCom"
as TRUE?
TAL = Time Allowed to Live
Value / Clarification
GOOSE subscribe quality information will
become QUESTIONABLE | TEST (=1100 0000
0001 0).
Payload data is not received.
GOOSE subscribe quality information will
message is become
(=1100 0000 0100 0).
Payload data is not received.
Boolean
BitSring
Integer
Unsigned Integer
But each data size shall be less than 32 bits.
Other types (TimeStamp, OctetString, etc) will
be ignored by IED.
When GOOSE subscribe quality information is
GOOD, the IED receives the payload data.
This is not checked. Two GOOSEs, which have
same header (e.g.GoID) and different dataset
structure, are treated as the same GOOSEs.
And if received GOOSEs have same header, the
fixed position of the GOOSE dataset is read. E.g.
the 1st element of the dataset is set to read, it
keeps reading the 1st element even if the dataset
structure is different.
Note:
Subscribed payload data structure is checked to
determine if IED accepts/discards the data;
however the TAL timeout is reset even when such
data is discarded.
The device starts sending
stNum=1 and sqNum=1.
N
 338 
QUESTIONABLE |
6 F 2 T 0 1 7 2
INACCURATE
GOOSE from