Toshiba GRE110 Instruction Manual page 87

Overcurrent protection relay
Table of Contents

Advertisement

Record
In the "Record" menu, the fault records event records, disturbance records and counts such as trip
count and ΣIy count can be displayed or erased.
Status
The "Status" menu displays the power system quantities, binary input and output status, relay
measuring element status, signal source for time synchronisation (BI or Modbus), adjusts a clock
and LCD contrast.
Set. (view)
The "Set. (view)" menu displays the relay version, description, relay address and baud rate in RSM,
the current settings of record, status, protection, binary inputs, configurable binary outputs and
configurable LEDs.
Set. (change)
The "Set. (change)" menu is used to change the settings of password, description, relay address and
baud rate in Modbus communication, record, status, protection, binary inputs, configurable binary
outputs and configurable LEDs.
Since this is an important menu and is used to change settings related to relay tripping, it has
password security protection.
Control
The "Control" menu is used to operate the CB. When the cursor (>) is at Local / Remote position,
the CB control location change over key
position, the CB control keys ○ and | are enabled.
Since this is an important menu and is related to relay tripping, it has password security protection.
Test
The "Test" menu is used to set testing switches and to forcibly operate binary output relays.
When the LCD is off, press the ENTER key to display the top "MAIN MENU" screen and then
proceed to the relay menus.
> R e
S t
S e
S e
C o
T e
To display the "MAIN MENU" screen when the digest screen is displayed, press the ▼ key to turn
off the LCD, then press the ENTER key.
Press the END key when the top screen is displayed to turn off the LCD.
An example of the sub-menu screen is shown below. The top line shows the hierarchical layer. The
8th line under item is not displayed for all the screens. " " or " " or " " displayed on the far right
shows that lower or upper lines exist.
is enabled. When the cursor (>) is at CB close/open
L/R
M A I
N
M E N U
c
o
r
d
a t
u s
t
.
(
v i
e w )
t
.
(
c
h a n g e )
n t
r
o l
s
t
 86 
6 F 2 T 0 1 7 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents