Assigning Signal To Binary Output Relay - Toshiba GRE110 Instruction Manual

• Enter 0 (= OR) and press the ENTER key.
• Enter 0 (= Instantaneous) and press the ENTER key.
• Press the END key to return to the "LED∗" screen.
• Select "Functions" on the "LED∗" screen to display the "Functions" screen.
/ 5
I n
> I
I
I
I
• Assign the gate In #1 the number corresponding to the testing element referring to Appendix B,
and assign other gates the "0".

Assigning signal to Binary Output Relay

•
Select "Binary O/P" on the "Set. (change)" screen to display the "Binary O/P" screen.
/ 2
> B O 1
B O 2
B O 3
B O 4
Note: The setting is required for all the binary outputs. If any of the binary outputs are not used, enter
0 to logic gates In #1 to #4 in assigning signals.
• Select the output relay number (BO number) and press the ENTER key to display the "BO∗"
screen.
/ 3
> L o
F u n c
F u n c t i o n s
♯ 1
n ♯ 1 _ _
n ♯ 2 _ _
n ♯ 3 _ _
n ♯ 4 _ _
B i n a r y O /
B O ∗
g i c / R e s e
t i o n s
 164 
_
_
_
_
_
P
t
6 F 2 T 0 1 7 2