Clock Adjustment; Lcd Contrast - Toshiba GRE110 Instruction Manual

The asterisk on the far left shows that the internal clock is synchronised with the marked source
clock. If the marked source clock is inactive, the internal clock runs locally.
Note: If the Binary input signal has not been detected for one hour or more after the last detection, the
status becomes "inactive".
For details of the setting time synchronisation, see Section 4.2.6.6.
4.2.4.5

Clock Adjustment

To adjust the clock when the internal clock is running locally, do the following:
• Select "Status" on the "MAIN MENU" screen to display the "Status" screen.
• Select "Clock adjust." to display the setting screen.
/ 2
> M i
H o
D a y
M o
Y e
Line 1 and 2 show the current date and time. The time can be adjusted only when the clock is
running locally. When [BI], [M] or [S] is active, the adjustment is invalid.
• Enter a numerical value for each item and press the ENTER key. For details to enter a
numerical value, see 4.2.6.1.
• Press the END key to adjust the internal clock to the set hours without fractions and return to
the previous screen.
If a date which does not exist in the calendar is set and END is pressed, "**** Error ****" is
displayed on the top line and the adjustment is discarded. Return to the normal screen by pressing
the CANCEL key and adjust again.
4.2.4.6

LCD Contrast

To adjust the contrast of LCD screen, do the following:
• Select "Status" on the "MAIN MENU" screen to display the "Status" screen.
• Select "LCD contrast" to display the setting screen.
2 6 / A u g / 2 0 0 9
0 0 : 0 0 : 0 0
n u t e
0 _
u r
0 _
2 6 _
n t h
8 _
a r
2 0 0 9 _
 98 
[ L ]
6 F 2 T 0 1 7 2